跳转到主内容

简介

These next steps will guide you to correctly installing the graphics card in your computer.

配件

没有特定配件。

  1. To avoid electrocution, shut down the computer. Do not open the computer or attempt to install any items inside it while the computer is on.
    • To avoid electrocution, shut down the computer. Do not open the computer or attempt to install any items inside it while the computer is on.

    • To avoid being burned, wait at least 10 minutes to allow the computer's internal components to cool.

  2. Remove all the cables, including the power cables before opening the unit.
    • Remove all the cables, including the power cables before opening the unit.

  3. Lift the tab to unlock the side panel. The panel should fall out. If the panel does not fall out by itself pull a little from the edges.
    • Lift the tab to unlock the side panel.

    • The panel should fall out. If the panel does not fall out by itself pull a little from the edges.

  4. Remove the air deflector (the clear plastic cover) by pulling on the handle. Remove the air deflector (the clear plastic cover) by pulling on the handle. Remove the air deflector (the clear plastic cover) by pulling on the handle.
    • Remove the air deflector (the clear plastic cover) by pulling on the handle.

  5. Locate the graphics card in the desktop.
    • Locate the graphics card in the desktop.

  6. Using a Phillips # 1 screw driver, unscrew the screw right next to the graphics card. Using a Phillips # 1 screw driver, unscrew the screw right next to the graphics card.
    • Using a Phillips # 1 screw driver, unscrew the screw right next to the graphics card.

  7. Last thing to do is to gently shake the card out of it's slot by pulling it straight out.  (If  the card does not come out easily, don't force it. You need to release a latch on the logic board behind the AGP connector while pulling out the video card.)
    • Last thing to do is to gently shake the card out of it's slot by pulling it straight out. (If the card does not come out easily, don't force it. You need to release a latch on the logic board behind the AGP connector while pulling out the video card.)

结论

To reassemble your device, follow these instructions in reverse order.

35等其他人完成本指南。

Salvador Aguilar

于2010年01月21日注册

2,370 信誉积分

创作了3篇指南

团队

Cal Poly, Team 5-8, Forte Winter 2010 Cal Poly, Team 5-8, Forte Winter 2010 的会员

CPSU-FORTE-W10S5G8

7 名成员

创作了11篇指南

hello, i’m wondering what’s the maxi ram of graphic card can be accepted by g5? we know it can do 128m 256m in standard, but what if we install a 512m or even 1go ram graphic card, it there anyone who has tried please? thank you!

qian daniel - 回复

Hi Salvador,

Many thanks for the guide. I already knew all the steps until the ‘secret’ release mechanism, which is why I came to this page.

So, it would be really handy for future viewers if you included a picture of the position and design of the release latch. It would have saved me from fumbling around for 15 minutes pressing an unrelated button, which is situated just behind the release latch.

Anthony Lythgoe - 回复

添加评论

浏览统计数据:

过去的24小时: 4

过去的7天: 12

过去的30天: 84

总计 38,302