简介

Installing the video card involves removing the outer case before actual installation.

配件

无需配件。

  1. Release the back handle of the PowerMac. Slowly pull out the cube by holding the end of the handle. Watch for any parts that may become entangled with the outer case. Push back the handle after you have taken the core out of the case. Push back the handle after you have taken the core out of the case.
    • Release the back handle of the PowerMac. Slowly pull out the cube by holding the end of the handle. Watch for any parts that may become entangled with the outer case.

    • Push back the handle after you have taken the core out of the case.

  2. Place the cube upside down and remove the four T10 Torx screws on the front plate. Then remove the two screws on each side. Place the cube upside down and remove the four T10 Torx screws on the front plate. Then remove the two screws on each side.
    • Place the cube upside down and remove the four T10 Torx screws on the front plate. Then remove the two screws on each side.

  3. Slowly lift the plate off the cube and disconnect the power cord.
    • Slowly lift the plate off the cube and disconnect the power cord.

  4. Remove the four pillars from each corner.
    • Remove the four pillars from each corner.

    • The pillars should come out fairly easily.

  5. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  6. Remove the screws on the back of the VGA port.
    • Remove the screws on the back of the VGA port.

  7. Remove the screw attaching the video card to the logic board.
    • Remove the screw attaching the video card to the logic board.

  8. Remove power cord from the video card. Remove power cord from the video card.
    • Remove power cord from the video card.

  9. Remove the power cord.
    • Remove the power cord.

    • Remove the connector.

    • Remove the video card from the logic board.

  10. Carefully lift the video card from the logic board.
    • Carefully lift the video card from the logic board.

    • The video card should come out easily.

  11. Separate the video card from the adapter. Separate the video card from the adapter.
    • Separate the video card from the adapter.

结论

To reassemble your device, follow these instructions in reverse order.

6等其他人完成本指南。

Ryan Chun

于2010年06月24日注册

674 信誉积分

创作了7篇指南

团队

Cal Poly, Team 2-7, Johann Summer 2010 Cal Poly, Team 2-7, Johann Summer 2010 的会员

CPSU-JOHANN-R10S2G7

5 名成员

创作了7篇指南

浏览统计数据:

过去的24小时: 2

过去的7天: 6

过去的30天: 38

总计 8,777