Porter-Cable PC60TAG Power Switch Replacement - iFixit 维修指南

简介

Often times, a grinder that won't power on is due to a faulty power switch. This mechanical part may fail over time, resulting in the need to replace it. Use this guide to replace the power switch in your Porter-Cable PC60TAG.

你所需要的

步骤 1 Power Switch

Porter-Cable PC60TAG Power Switch Replacement, Power Switch: 步骤 1 中的图像 1，1

Using the Phillips #2 screwdriver, remove the 3/4" Phillips screw on the back cover.
Unplug the grinder before disassembling.

步骤 2

Porter-Cable PC60TAG Power Switch Replacement: 步骤 2 中的图像 1，1

Holding the front of the device, carefully slide the back cover over the cord.

步骤 3

Porter-Cable PC60TAG Power Switch Replacement: 步骤 3 中的图像 1，1

Using the Phillips #2 screwdriver, loosen, but do not remove, the two terminal screws securing the black and white wires from the power cord.

步骤 4

Porter-Cable PC60TAG Power Switch Replacement: 步骤 4 中的图像 1，1

Careful remove each wire from the power cord from underneath the terminals.

步骤 5

Porter-Cable PC60TAG Power Switch Replacement: 步骤 5 中的图像 1，1

Using the spudger, carefully push the red power switch out of the device.

步骤 6

Porter-Cable PC60TAG Power Switch Replacement: 步骤 6 中的图像 1，1

From the other side of the device, use the spudger to carefully pry out power switch away from the device.

步骤 7

Porter-Cable PC60TAG Power Switch Replacement: 步骤 7 中的图像 1，1

Using your fingers, carefully remove each of the gold terminals from the power switch. You may need to gently wiggle the terminal back and forth in order to remove it.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Mackenzie Fairbanks

于03/24/16注册

564 声望

创作了5篇指南

+ 7更多徽章

团队

UMass Dartmouth, Team 2-2, Isaacson Spring 2016 UMass Dartmouth, Team 2-2, Isaacson Spring 2016 的会员

UMASSD-ISAACSON-S16S2G2

3 名成员

创作了5篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 5

总计 700