修复你的物品 社区 商店

Polycom SoundStation Back Housing Replacement

简介

Taking off the back of this phone will allow you to look at or replace all of the pieces inside this device. This is a prerequisite guide for any other replacement you would like to accomplish with your SoundStation.

你所需要的

  1. Polycom SoundStation Back Housing Replacement, Back Housing: 步骤 1 中的图像 1，1

    • Flip the device over. Using a Phillips #00 screwdriver, remove the black 10mm screw on each three legs of the phone.

    • Using a Phillips #00 screwdriver, remove the two silver 7mm screws as pictured.

    翻译

  3. Polycom SoundStation Back Housing Replacement: 步骤 2 中的图像 1，2 Polycom SoundStation Back Housing Replacement: 步骤 2 中的图像 2，2

    • Gently lift and separate the back housing from the rest of the device. Now you've got the back housing off!

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Cali Nowak Credit

于09/02/14注册

431 声望

创作了4篇指南

徽章: 7

+ 4更多徽章

团队

USF Sarasota-Manatee, Team 1-3, Stewart Fall 2014 USF Sarasota-Manatee, Team 1-3, Stewart Fall 2014 的会员

USFSM-STEWART-F14S1G3

3 名成员

创作了14篇指南

一条评论

thanks for this - the 7mm were under footpads so I couldn’t see them. cover now off, keyboard dried of coffee and working fine again!!

J M - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 6

总计 1,150