简介
The spread roll spring is a vital part of the polaroid that ensures that your developing photo will exit the camera once your photo is taken.
你所需要的
-
-
Push the lever on the bottom of the camera towards the left.
-
Open the rear door of the camera.
-
-
-
在这个步骤中使用的工具:Flathead 3/32" or 2.5 mm Screwdriver$5.49
-
Unscrew the three 2.5 mm screws (attached to the metal plate) with a 3.0 flathead screwdriver. Then take off the metal plate.
-
即将完成!
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.