跳转到主内容

修复你的物品

维修的权力

商店

简介

This guide requires basic disassembly skills to get inside the phone. Allowing you to pull out and then realign the buttons.

  1. Using a Phillips #1 screwdriver, remove the 4.8mm Phillips #1 screw on the battery cover by twisting the screwdriver counter-clockwise. Using a Phillips #1 screwdriver, remove the 4.8mm Phillips #1 screw on the battery cover by twisting the screwdriver counter-clockwise.
    • Using a Phillips #1 screwdriver, remove the 4.8mm Phillips #1 screw on the battery cover by twisting the screwdriver counter-clockwise.

  2. Then simply remove the two AAA batteries by pulling on one end of the battery and lifting it straight out. Then simply remove the two AAA batteries by pulling on one end of the battery and lifting it straight out. Then simply remove the two AAA batteries by pulling on one end of the battery and lifting it straight out.
    • Then simply remove the two AAA batteries by pulling on one end of the battery and lifting it straight out.

  3. Take care when you want to close it. There is a notch. First you have to hook up that notch. Then firmly use a PH1 screwdriver to secure it.
    • Take care when you want to close it. There is a notch.

    • First you have to hook up that notch.

    • Then firmly use a PH1 screwdriver to secure it.

  4. Remove 4 13.8mm screws holding the device back using a Phillips #1 screw driver. Remove 4 13.8mm screws holding the device back using a Phillips #1 screw driver.
    • Remove 4 13.8mm screws holding the device back using a Phillips #1 screw driver.

  5. Removed 1 4.8mm phillips head screw with a #0 Phillips head screw driver and lift away battery back being conscientious of wires. Removed 1 4.8mm phillips head screw with a #0 Phillips head screw driver and lift away battery back being conscientious of wires. Removed 1 4.8mm phillips head screw with a #0 Phillips head screw driver and lift away battery back being conscientious of wires.
    • Removed 1 4.8mm phillips head screw with a #0 Phillips head screw driver and lift away battery back being conscientious of wires.

  6. Carefully  remove the button board to gain access to the buttons. Carefully  remove the button board to gain access to the buttons.
    • Carefully remove the button board to gain access to the buttons.

  7. Carefully remove each button from the baby phone. When handling buttons be sure not to misplace the button contacts.
    • Carefully remove each button from the baby phone.

    • When handling buttons be sure not to misplace the button contacts.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

tellocordova

于2015年09月04日注册

342 信誉积分

创作了2篇指南

团队

USF Tampa, Team 2-4, Sullivan Fall 2015 USF Tampa, Team 2-4, Sullivan Fall 2015 的会员

USFT-SULLIVAN-F15S2G4

3 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 11

总计 427