简介

You will need a Phillips screwdriver to remove the screws from the back of the phone, and a spudger to pry the plastic pieces from each other.

  1. Remove the battery.
    • Remove the battery.

    • Remove four Phillips screws.

    添加评论

  2. Pry up the plastic layer with a plastic opening tool.
    • Pry up the plastic layer with a plastic opening tool.

    • NOTE: Be careful that you do not separate the two plastic parts completely they are fragile and may break if pulled too hard.

    添加评论

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Slide out the keyboard carefully in between the two layers.

    添加评论

    • Insert the new keyboard in between the two layers carefully.

    添加评论

    • Check if the edges are perfectly aligned between the two plastic layers after you insert the keyboard.

    添加评论

    • Press the two plastic layers back together.

    • Reinsert the four screws and place the battery and cover back.

    添加评论

结论

You now have a new keyboard.

2等其他人完成本指南。

Richard

于2014年02月13日注册

116 信誉积分

撰写一个指南

团队

Ohio State, Team 1-4, Meza Spring 2014 Ohio State, Team 1-4, Meza Spring 2014 的会员

OSU-MEZA-S14S1G4

4 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 176