修复你的物品 社区 商店

Palm Rest Disassembly

简介

Follow this disassembly to remove the top casing of your laptop.

你所需要的

  1. Palm Rest Disassembly, Battery: 步骤 1 中的图像 1，1

    • Turn power off using the power button located in the top left corner of the keyboard. Press and hold the power button for 3 seconds until it turns off.

    编辑

  2. Palm Rest Disassembly: 步骤 2 中的图像 1，2 Palm Rest Disassembly: 步骤 2 中的图像 2，2

    • Close the laptop and flip it over so that the HP cover logo is on the underside of the laptop.

    编辑

  3. Palm Rest Disassembly: 步骤 3 中的图像 1，2 Palm Rest Disassembly: 步骤 3 中的图像 2，2

    • Locate the battery and the two switches that release the battery when they are unlocked.

    编辑

  4. Palm Rest Disassembly: 步骤 4 中的图像 1，2 Palm Rest Disassembly: 步骤 4 中的图像 2，2

    • Slide the left switch to the right so that the icon of a locked padlock is no longer visible and the icon of an unlocked padlock is now visible.

    编辑

  6. Palm Rest Disassembly: 步骤 5 中的图像 1，3 Palm Rest Disassembly: 步骤 5 中的图像 2，3 Palm Rest Disassembly: 步骤 5 中的图像 3，3

    • With your left hand, slide the right switch to the left and hold it in place. This will unlock the battery and allow you to easily slide it out of its port.

    • While holding the switch in place, use your right hand to gently remove the battery from its port.

    编辑

  7. Palm Rest Disassembly, Palm Rest Disassembly: 步骤 6 中的图像 1，1

    • Remove the thirteen 7 mm PH1 Phillips head screws from the bottom of the laptop.

    编辑

  8. Palm Rest Disassembly: 步骤 7 中的图像 1，1

    • Pry up and detach the keyboard. Starting at the top, slowly work the side and pull the keyboard away from you to unseat the bottom tabs.

    编辑

  9. Palm Rest Disassembly: 步骤 8 中的图像 1，1

    • Remove the keyboard connection from the laptop by flipping up the black tab on the ZIF connector.

    编辑

  10. Palm Rest Disassembly: 步骤 9 中的图像 1，2 Palm Rest Disassembly: 步骤 9 中的图像 2，2

    • Remove the palm rest using the blue spudger tool.

    编辑

  11. Palm Rest Disassembly: 步骤 10 中的图像 1，1

    • Remove the five 3 mm PH1 Phillips head screws underneath keyboard.

    编辑

  12. Palm Rest Disassembly: 步骤 11 中的图像 1，1

    • Remove metal keyboard underlayment.

    • There is no way to separate the palm rest from the keyboard. They both are removed as an assembly.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与4其他贡献者

Benjamin Poirier

于10/17/17注册

503 声望

创作了2篇指南

徽章: 11

+ 8更多徽章

团队

UMass Dartmouth, Team S1-G4, Simcock Fall 2017 UMass Dartmouth, Team S1-G4, Simcock Fall 2017 的会员

UMASSD-SIMCOCK-F17S1G4

3 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 6

总计 1,254