简介

Be careful with the screen if cracked, it may have sharp pieces.

配件

无需配件。

  1. Unscrew the three screws on the back of the Palm Pilot.
    • Unscrew the three screws on the back of the Palm Pilot.

    添加评论

  2. Pull the back cover from the bottom of the device and separate the interlocking tabs on the top to remove the back cover.
    • Pull the back cover from the bottom of the device and separate the interlocking tabs on the top to remove the back cover.

    添加评论

    • The front plastic cover is now free to be removed from the rest of the device.

    添加评论

    • The keypad is now free to be removed from the rest of the device.

    添加评论

    • Looking at the back of the device hold one of the white tabs on the ribbon cable connector down and use tweezers to push in the other white tab toward the device at the same time.

    添加评论

    • The ribbon cable is now loose. Use the tweezers to carefully slide the ribbon cable out of the connector.

    添加评论

    • The screen is now disconnected from the rest of the device and can now be removed.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Kevin Santos

于2012年03月09日注册

1 信誉积分

创作了4篇指南

团队

Clemson, Team 2-4, Benson Spring 2012 Clemson, Team 2-4, Benson Spring 2012 的会员

CLEM-BENSON-S12S2G4

3 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 5

总计 1,087