跳转到主内容

你所需要的

  1. PSP Go Back Cover Replacement, Back Cover: 步骤 1 中的图像 1,2 PSP Go Back Cover Replacement, Back Cover: 步骤 1 中的图像 2,2
    • Unscrew the four Phillips screws on the back of the PSP Go.

    • Rotate the PSP so you can see the top of the device.

    • Unscrew the two Phillips screws next to the volume buttons.

  2. PSP Go Back Cover Replacement: 步骤 2 中的图像 1,2 PSP Go Back Cover Replacement: 步骤 2 中的图像 2,2
    • Use a plastic opening tool around the perimeter of the back cover to loosen it on all sides.

    • Open the back cover by gently lifting the right side, and rotating it to the left side (as if you were opening a book).

    • Be careful not to rotate the back cover from the bottom, as you will break the plastic screw holes on top of the device.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时: 3

过去 7 天: 29

过去 30 天: 83

总计 18,427