跳转到主内容

PDP Rematch Advanced Vibration Motors Replacement

你所需要的

  1. PDP Rematch Advanced Vibration Motors Replacement, Vibration Motors: 步骤 1 中的图像 1,3 PDP Rematch Advanced Vibration Motors Replacement, Vibration Motors: 步骤 1 中的图像 2,3 PDP Rematch Advanced Vibration Motors Replacement, Vibration Motors: 步骤 1 中的图像 3,3
    • Orient the controller so the back side is facing up.

    • Use a Phillips #000 screwdriver to remove the seven 9 mm screws that secure the back shell.

  2. PDP Rematch Advanced Vibration Motors Replacement: 步骤 2 中的图像 1,3 PDP Rematch Advanced Vibration Motors Replacement: 步骤 2 中的图像 2,3 PDP Rematch Advanced Vibration Motors Replacement: 步骤 2 中的图像 3,3
    • Make sure the front shell of the controller is facing your work surface to prevent the face buttons from falling out.

    • Pull apart the controller's front and back shell with moderate force.

  3. PDP Rematch Advanced Vibration Motors Replacement: 步骤 3 中的图像 1,2 PDP Rematch Advanced Vibration Motors Replacement: 步骤 3 中的图像 2,2
    • Use a soldering iron to desolder the two wires connecting the vibration motor to the motherboard.

    • Repeat for the other vibration motor if necessary.

  4. PDP Rematch Advanced Vibration Motors Replacement: 步骤 4 中的图像 1,2 PDP Rematch Advanced Vibration Motors Replacement: 步骤 4 中的图像 2,2
    • Grab the motor and pull away from the back shell to remove the vibration motor.

结论

To reassemble your device, follow the above steps in reverse order.
Take your e-waste to an R2 or e-Stewards certified recycler.
Repair didn’t go as planned? Try some basic troubleshooting or ask our Answers community for help.

另外一个人完成了本指南。

Dylan Newcomb

于09/23/24注册

109 声望

撰写一个指南

0指南评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 4

过去 30 天: 24

总计 194