跳转到主内容

Oster 3905 Lever Spring Replacement

你所需要的

  1. Oster 3905 Lever Spring Replacement, Slot Levers: 步骤 1 中的图像 1,1
    • Firmly grip your hand around the slot lever.

  2. Oster 3905 Lever Spring Replacement: 步骤 2 中的图像 1,1
    • Stabilize the toaster by placing your hand on top.

  3. Oster 3905 Lever Spring Replacement: 步骤 3 中的图像 1,2 Oster 3905 Lever Spring Replacement: 步骤 3 中的图像 2,2
    • Forcefully pull the slot lever away from the toaster by keeping parallel to the table.

  4. Oster 3905 Lever Spring Replacement: 步骤 4 中的图像 1,1
    • Both slot levers can be removed.

  5. Oster 3905 Lever Spring Replacement, Outer Shell: 步骤 5 中的图像 1,1
    • Place the toaster upside down so the bottom is facing the ceiling.

  6. Oster 3905 Lever Spring Replacement: 步骤 6 中的图像 1,2 Oster 3905 Lever Spring Replacement: 步骤 6 中的图像 2,2
    • Take off both rubber feet using a small metal spudger.

    • Wedge a spudger under the feet and pull up to pop off.

  7. Oster 3905 Lever Spring Replacement: 步骤 7 中的图像 1,1
    • Use a PH#2 screw bit to remove eight 12mm screws that are located around the perimeter.

    • There are two screws under the rubber feet.

  8. Oster 3905 Lever Spring Replacement: 步骤 8 中的图像 1,1
    • Place the toaster right side up.

  9. Oster 3905 Lever Spring Replacement: 步骤 9 中的图像 1,2 Oster 3905 Lever Spring Replacement: 步骤 9 中的图像 2,2
    • Grab the outer shell firmly and pull up towards the face of the toaster.

  10. Oster 3905 Lever Spring Replacement: 步骤 10 中的图像 1,1
    • For this part, you might need to wiggle the toaster to get the outer shell off.

    • The shell will not completely come off until the motherboard is removed in the next step.

  11. Oster 3905 Lever Spring Replacement: 步骤 11 中的图像 1,3 Oster 3905 Lever Spring Replacement: 步骤 11 中的图像 2,3 Oster 3905 Lever Spring Replacement: 步骤 11 中的图像 3,3
    • Use a J1 screw bit to unscrew eight 8mm screws from the motherboard.

  12. Oster 3905 Lever Spring Replacement: 步骤 12 中的图像 1,2 Oster 3905 Lever Spring Replacement: 步骤 12 中的图像 2,2
    • Take out the grey “cancel” and “bagel” buttons from the shell.

  13. Oster 3905 Lever Spring Replacement, Lever Spring: 步骤 13 中的图像 1,2 Oster 3905 Lever Spring Replacement, Lever Spring: 步骤 13 中的图像 2,2
    • Use the plastic opening tool to remove the top metal panel by prying the 4 top metal tabs upwards. They will be able to slide through the openings and be pulled upwards.

  14. Oster 3905 Lever Spring Replacement: 步骤 14 中的图像 1,2 Oster 3905 Lever Spring Replacement: 步骤 14 中的图像 2,2
    • Once the top metal panel is unhooked, lift and let it hang off the side of the toaster.

  15. Oster 3905 Lever Spring Replacement: 步骤 15 中的图像 1,3 Oster 3905 Lever Spring Replacement: 步骤 15 中的图像 2,3 Oster 3905 Lever Spring Replacement: 步骤 15 中的图像 3,3
    • Use a metal spudger to pry the 8 tabs upwards along the metal that separates the two slots.

    • Pull the metal spacer upwards to release from the toaster.

  16. Oster 3905 Lever Spring Replacement: 步骤 16 中的图像 1,2 Oster 3905 Lever Spring Replacement: 步骤 16 中的图像 2,2
    • Remove the spring wrapped around a metal rod at the front of the toaster, located behind the white plastic lever holder.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Sydney Alcaraz

于09/12/16注册

601 声望

创作了3篇指南

团队

CSU Fullerton, Team 2-1, Bruce Fall 2016 CSU Fullerton, Team 2-1, Bruce Fall 2016 的会员

CSUF-BRUCE-F16S2G1

5 名成员

创作了6篇指南

2条评论

Where's the fix?

D Unger - 回复

Yeah. You just remove the spring? And then what? Surely removing the spring is not the fix.

kryshu - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 11

总计 2,923