跳转到主内容

Optoma HD20 Focal Lens Replacement

你所需要的

  1. Optoma HD20 Focal Lens Replacement, Disassembling Optoma HD20 Cover: 步骤 1 中的图像 1,2 Optoma HD20 Focal Lens Replacement, Disassembling Optoma HD20 Cover: 步骤 1 中的图像 2,2
    • Twist the focal cap clockwise until it is fully extended.

    • Remove the focal cap by pulling it straight out.

  2. Optoma HD20 Focal Lens Replacement: 步骤 2 中的图像 1,1
    • Use a Phillips #1 screwdriver to remove the three 7.5mm screws on the bottom of the device.

  3. Optoma HD20 Focal Lens Replacement: 步骤 3 中的图像 1,1
    • Use a plastic opening tool to gently pry the top cover off of the device.

    • It is easier to pry off the cover from the back side just above the HDMI ports.

  4. Optoma HD20 Focal Lens Replacement: 步骤 4 中的图像 1,1
    • When removing the cover, be cautious of the ribbon connecting the top buttons to the main circuit board. The ribbon must be disconnected before proceeding.

    • Remove the ribbon by disconnecting it from the main circuit board.

    • Lift up the clip holding it down and pull the ribbon out.

  5. Optoma HD20 Focal Lens Replacement, Focal Lens: 步骤 5 中的图像 1,1
    • Use a Phillips #1 screwdriver to unscrew the small black 2 mm screw on the side of the focal lens.

  6. Optoma HD20 Focal Lens Replacement: 步骤 6 中的图像 1,1
    • Remove the focal lens by twisting it clockwise until it comes off.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Trever

于01/22/15注册

1,264 声望

创作了6篇指南

团队

Cal Poly, Team 21-23, Maness Winter 2015 Cal Poly, Team 21-23, Maness Winter 2015 的会员

CPSU-MANESS-W15S21G23

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 4

过去 30 天: 13

总计 4,291