跳转到主内容
  1. Turn the phone over so the screen is face down.
    • Turn the phone over so the screen is face down.

  2. Remove the back cover by locating the slit on the bottom of the phone and lifting up. Remove the back cover by locating the slit on the bottom of the phone and lifting up.
    • Remove the back cover by locating the slit on the bottom of the phone and lifting up.

  3. Remove the battery by lifting it out of the device.
    • Remove the battery by lifting it out of the device.

  4. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  5. Remove the two "L-shaped" antennas by unscrewing the following screws: Four screw M1 .4x5.0
    • Remove the two "L-shaped" antennas by unscrewing the following screws:

    • Four screw M1 .4x5.0

    • Two screw RF1 .4x4

    • In addition to unscrewing the screws, remove the B-Cover (which will fall right out without the screws).

  6. You will now have two halves of the phone.
    • You will now have two halves of the phone.

    • Grab the half of the phone that has the keyboard on it

  7. Remove the keyboard by unsnapping the frame and then lifting the pad out from the device.
    • Remove the keyboard by unsnapping the frame and then lifting the pad out from the device.

    • Place the key pad and cover to the side for the remaining steps.

  8. Use a blue plastic opening tool lift the motherboard out of the back cover
    • Use a blue plastic opening tool lift the motherboard out of the back cover

  9. Look at the bottom of the motherboard to find the:
    • Look at the bottom of the motherboard to find the:

    • USB Port

    • Once you've located the USB Port you can search online or call the manufacturer to replace it.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Troy Posey

于2014年03月13日注册

349 信誉积分

创作了2篇指南

团队

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 16

总计 1,668