跳转到主内容

简介

Installing a Wii Remote motherboard requires the removal of the front cover plate and allows access to the B button.

  1. Flip the Wii Remote over so the battery cover faces you. Push up on the bottom tab.
    • Flip the Wii Remote over so the battery cover faces you.

    • Push up on the bottom tab.

    • Remove the battery cover.

  2. Remove the first battery by pressing down on the positive end and pulling the battery out.
    • Remove the first battery by pressing down on the positive end and pulling the battery out.

    • Remove the second battery by pushing up on the positive end and pulling the battery out.

  3. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  4. Using a tri-point Y1 Screwdriver, remove the two center 7mm screws by turning them counterclockwise.
    • Using a tri-point Y1 Screwdriver, remove the two center 7mm screws by turning them counterclockwise.

    • Repeat with the two bottom screws.

  5. With the flat end of a spudger, gently apply pressure to the tabs located on left side of the controller. These tabs are breakable. However, if the tabs are broken the controller will still function.
    • With the flat end of a spudger, gently apply pressure to the tabs located on left side of the controller.

    • These tabs are breakable. However, if the tabs are broken the controller will still function.

    • Open the front plate like a book.

    • Small parts may fall out as you open the front plate.

  6. Using the connector port, gently lift the motherboard about 2 cm from the base. Electrostatic discharge may damage the device. Be careful and avoid touching the electronic components as much as possible.
    • Using the connector port, gently lift the motherboard about 2 cm from the base.

    • Electrostatic discharge may damage the device. Be careful and avoid touching the electronic components as much as possible.

  7. Grasp the edges of the motherboard and pull it straight away from the case. Grasp the edges of the motherboard and pull it straight away from the case.
    • Grasp the edges of the motherboard and pull it straight away from the case.

结论

To reassemble your device, follow these instructions in reverse order.

14等其他人完成本指南。

Emily

于2013年04月14日注册

727 信誉积分

创作了6篇指南

团队

Cal Poly, Team 3-44, Amido Spring 2013 Cal Poly, Team 3-44, Amido Spring 2013 的会员

CPSU-AMIDO-S13S3G44

4 名成员

创作了6篇指南

Where do you find a motherboard and how much do they typically cost?

Jeff - 回复

This is useless because you can't just buy a motherboard. May as well buy a new remote for $20

Lisa Cole - 回复

Where can i buy a brand new and original (not fake of course) wii remote for $20?

arttitudesign -

You can buy a first party Wii remote plus for under $50 at Walmart, best buy, or online on Amazon or on Nintendos website

Darren Woloshyn - 回复

What is the dimension is the motherboard? I want to make a custom motherboard for the housing but I haven't managed to get int the wiimote yet as I am waiting for my tri screwdriver

Michael baldwin - 回复

添加评论

浏览统计数据:

过去的24小时: 4

过去的7天: 33

过去的30天: 143

总计 15,359