跳转到主内容

简介

This guide will show how to replace the power cord.

  1. Take out the three 15 mm Phillips #1 screws.
    • Take out the three 15 mm Phillips #1 screws.

    • Remove the 15mm T10 screw.

    • Place the 4 screws on the magnetic mat.

  2. Remove the gray base by lifting upwards and placing to the side.
    • Remove the gray base by lifting upwards and placing to the side.

  3. Remove plastic coverings and aluminum wrap to unattach the power cord.
    • Remove plastic coverings and aluminum wrap to unattach the power cord.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Cameron Just

于2016年01月20日注册

379 信誉积分

创作了3篇指南

团队

USF Tampa, Team 15-1, Remmell Spring 2016 USF Tampa, Team 15-1, Remmell Spring 2016 的会员

USFT-REMMELL-S16S15G1

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 11

总计 2,598