简介

LCD screens are known to shatter when dropped. In this guide you will replace the LCD screen that is on the inside of the camera.

  1. Remove the two visible 6.0 mm Philips #0 screws on the left and right sides of the viewfinder. These screws are highlighted in red.
    • Remove the two visible 6.0 mm Philips #0 screws on the left and right sides of the viewfinder. These screws are highlighted in red.

  2. Remove the four 6.0 mm Philips #0 screws on the left and right sides of the camera. Remove the four 6.0 mm Philips #0 screws on the left and right sides of the camera.
    • Remove the four 6.0 mm Philips #0 screws on the left and right sides of the camera.

  3. Remove the four highlighted 3.0 mm Philips #0 screws on the bottom of the camera.
    • Remove the four highlighted 3.0 mm Philips #0 screws on the bottom of the camera.

  4. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  5. While pulling the bottom down, remove the back of the camera.
    • While pulling the bottom down, remove the back of the camera.

    • Be careful not to pull too hard on the back as it is connected via a ribbon cable. Be sure to disconnect this cable on the main board.

    • To disconnect the ribbon cable pull the small black tab upward and pull gently on the cable.

  6. Remove the six 3.0 mm Philips #0 screws on the inside of the back panel which contains the LCD screen.
    • Remove the six 3.0 mm Philips #0 screws on the inside of the back panel which contains the LCD screen.

  7. Detach the ribbon cables on the LCD casing.
    • Detach the ribbon cables on the LCD casing.

  8. Remove the metal casing containing the LCD screen using the plastic opening tool.
    • Remove the metal casing containing the LCD screen using the plastic opening tool.

    • Be sure to look at the picture to make sure you are removing the correct piece of metal. There should be no glue holding the correct piece to the frame.

  9. You should now be able to remove the LCD screen. Replace it with a new screen.
    • You should now be able to remove the LCD screen. Replace it with a new screen.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Gerik Kubiak

于2014年01月21日注册

300 信誉积分

创作了2篇指南

团队

Cal Poly, Team 6-19, Maness Winter 2014 Cal Poly, Team 6-19, Maness Winter 2014 的会员

CPSU-MANESS-W14S6G19

4 名成员

创作了6篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 6

过去的30天: 38

总计 4,202