修复你的物品 社区 商店
加入维修社区 - 创建账户

Neato Botvac 80 Laser Replacement

简介

This guide will show you how to replace a faulty laser.

你所需要的

  1. Neato Botvac 80 Laser Replacement, Rear Bumper: 步骤 1 中的图像 1，1

    • Grab the rear bumper with both hands on either side.

    翻译
    询问修复机器人

  2. Neato Botvac 80 Laser Replacement: 步骤 2 中的图像 1，1

    • Pull the left and right sides away from the machine to unclip the bumper. This requires that you bend the plastic a little bit. Unclip one side a little bit and allow the prong to rest on the side of the machine. Then unclip the other side and pull off the bumper parallel to both sides

    翻译
    询问修复机器人

  3. Neato Botvac 80 Laser Replacement, Top Face Panel: 步骤 3 中的图像 1，2 Neato Botvac 80 Laser Replacement, Top Face Panel: 步骤 3 中的图像 2，2

    • Looking from above, remove the two 11mm screws with a torx T10 screwdriver.

    翻译
    询问修复机器人

  5. Neato Botvac 80 Laser Replacement: 步骤 4 中的图像 1，1

    • Begin by placing the robot on it's back and removing the six 11m screws using a Torx T10 screwdriver.

    翻译
    询问修复机器人

  6. Neato Botvac 80 Laser Replacement: 步骤 5 中的图像 1，3 Neato Botvac 80 Laser Replacement: 步骤 5 中的图像 2，3 Neato Botvac 80 Laser Replacement: 步骤 5 中的图像 3，3

    • To remove the top, you must press in both of the clamps at the same time and push upwards.

    • When removing the top, before you can completely take it off you must unplug the LCD power cable from the motherboard.

    翻译
    询问修复机器人

  7. Neato Botvac 80 Laser Replacement, Laser: 步骤 6 中的图像 1，3 Neato Botvac 80 Laser Replacement, Laser: 步骤 6 中的图像 2，3 Neato Botvac 80 Laser Replacement, Laser: 步骤 6 中的图像 3，3

    • Lift gently upon the top panel.

    • Unplug the clip located on the right side before completely removing.

    翻译
    询问修复机器人

  8. Neato Botvac 80 Laser Replacement: 步骤 7 中的图像 1，3 Neato Botvac 80 Laser Replacement: 步骤 7 中的图像 2，3 Neato Botvac 80 Laser Replacement: 步骤 7 中的图像 3，3

    • This black cap spins so may need a hand when unscrewing the screws.

    • Locate and unscrew the four 12 mm screws located in the black cap with the phillips #00 screwdriver.

    • Lift the black cap to reveal the laser.

    翻译
    询问修复机器人

  9. Neato Botvac 80 Laser Replacement: 步骤 8 中的图像 1，3 Neato Botvac 80 Laser Replacement: 步骤 8 中的图像 2，3 Neato Botvac 80 Laser Replacement: 步骤 8 中的图像 3，3

    • There are two loosely secured black blinders on both the laser and sensor.

    • Gently pull back on the gold laser to remove it from the socket.

    • Unplug the mini LCU clip by gently pulling up and remove the laser.

    翻译
    询问修复机器人
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

与3其他贡献者

Brandon Blank

于02/02/17注册

675 声望

创作了5篇指南

徽章: 11

+ 8更多徽章

团队

USF Tampa, Team 17-5, Blackwell Spring 2017 USF Tampa, Team 17-5, Blackwell Spring 2017 的会员

USFT-BLACKWELL-S17S17G5

3 名成员

创作了12篇指南

9指南评论

lol. You don’t need to open it to replace the laser. The top is a clip on. Just pull it and remove 4 screws.

Evgany Vorona - 回复 分享

where do you buy the replacement laser?

Nancy Butler - 回复 分享

I too would like to know where he got a replacement laser.

Anthony Mainini - 回复 分享

where do I buy a replacement laser?

bjurgensen79@gmail.com

Beverly Jurgensen

Beverly Jurgensen - 回复 分享

Where do I buy a replacement laser?

Beverly Jurgensen

Beverly Jurgensen - 回复 分享

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 8

过去 30 天： 64

总计 9,868