Munchkinz Camera Replacement - iFixit 维修指南

简介

If the camera is not working correctly follow this guide to replace it.

你所需要的

步骤 1 Opening Device

Munchkinz Camera Replacement, Opening Device: 步骤 1 中的图像 1，1

Insert spudger into the USB Micro slot and pry the case apart.
Be careful not to go too deep and bend the prong inside the Micro USB port.

步骤 2 Pry Device Apart

Munchkinz Camera Replacement, Pry Device Apart: 步骤 2 中的图像 1，2

Munchkinz Camera Replacement, Pry Device Apart: 步骤 2 中的图像 2，2

Slide the wide plastic opening tool across the seem, separating it if you can't pry the device open using just the spudger.
Gently separate the case so none of the cords inside are disconnected

步骤 3 Separated Device

Munchkinz Camera Replacement, Separated Device: 步骤 3 中的图像 1，1

After prying the device apart, it should look like this.

步骤 4 Pry Camera

Munchkinz Camera Replacement, Pry Camera: 步骤 4 中的图像 1，1

Use the slim plastic opening tool to pry the camera from its initial position.

步骤 5 Disconnect Ribbon

Munchkinz Camera Replacement, Disconnect Ribbon: 步骤 5 中的图像 1，1

Use the precision tweezers to gently disconnect the camera ribbon that is connected to the motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

David Wood

于02/05/15注册

440 声望

创作了4篇指南

+ 3更多徽章

团队

UW Tacoma, Team 3-6, Rose Winter 2015 UW Tacoma, Team 3-6, Rose Winter 2015 的会员

UWT-ROSE-W15S3G6

3 名成员

创作了14篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 115