简介

Replacement of the TF6's dust cover is necessary when it is cracked or broken. Replacement dust covers can be obtained from any Mr. Coffee TF series coffeemaker or online at Mr. Coffee's website.

工具

无需工具。

配件

  1. Facing the front of the TF6, gently lift the dust cover along its hinge until it reaches its designed stopping point.
    • Facing the front of the TF6, gently lift the dust cover along its hinge until it reaches its designed stopping point.

    添加评论

  2. Orient the retaining bracket upwards (away from the main body of unit).
    • Orient the retaining bracket upwards (away from the main body of unit).

    • Do not push the retaining bracket beyond its designed range of motion. It may snap if too much force is applied outside its limit.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • With the retaining clip in its released position, pull the spout down towards the filter basket.

    添加评论

    • Carefully detach the dust cover by disengaging the locking pins, starting at one side.

    • Extra force may be required to disengage the dust cover's locking pins. Refrain from applying excessive upward force on the dust cover, as dong so may cause the pins to snap under pressure.

    添加评论

结论

Follow these steps in reverse order with a new Dust Cover.

Jordan

于2014年01月31日注册

201 信誉积分

创作了2篇指南

团队

Cal Poly, Team 13-18, Regan Winter 2014 Cal Poly, Team 13-18, Regan Winter 2014 的会员

CPSU-REGAN-W14S13G18

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 256