跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

Repair USB Connector for mouse

Check Vol, Data -, Data +, Ground for sure.

  1. I have old mouse (no have USB) and old flash drive (can't use memory). So, I will use flash drive's USB to replace mouse's connector
    • I have old mouse (no have USB) and old flash drive (can't use memory). So, I will use flash drive's USB to replace mouse's connector

  2. Use soldering iron for take USB from flash drive.
    • Use soldering iron for take USB from flash drive.

  3. Soldering components together. In this case Red=Vol, White=Data -, Green=Data +, Blue=Ground.
    • Soldering components together. In this case Red=Vol, White=Data -, Green=Data +, Blue=Ground.

  4. Test mouse.
    • Test mouse.

  5. If mouse is working, use heat-shrinkable tubing for close component and done.
    • If mouse is working, use heat-shrinkable tubing for close component and done.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

fchitphon

于2015年02月14日注册

181 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 10

过去的30天: 50

总计 2,197