简介

Replacement of malfunctioning LCD screen.

Open the flip cover of the phone with the LCD screen facing towards you.
  • Open the flip cover of the phone with the LCD screen facing towards you.

添加评论

Use a Razor Blade to remove the screw covers.
  • Use a Razor Blade to remove the screw covers.

  • Razor Blade is very sharp. Use caution.

添加评论

  • Unscrew the screws using a Phillips #00 Screwdriver.

添加评论

  • Insert a Spudger into the side crack of the flip cover and slowly separate the phone cover from the case.

添加评论

  • Gently separate the flip cover case from the phone with your hands when the crack is wide enough.

添加评论

  • Partially close the flip cover of the phone in order to take off the outer case.

添加评论

  • Completely remove the outer casing from the phone.

添加评论

  • Place your thumb underneath the protective metal covering to remove it from the phone.

添加评论

  • Gently detach the black microchip from the phone with a Tweezer.

添加评论

  • Prop out the LCD board from the phone using your fingertips.

添加评论

  • Remove the LCD board from the phone by grabbing the bottom side of the LCD board.

添加评论

  • Firmly detach the gold strip using a Tweezer.

添加评论

  • Prop out the LCD screen using a Small Flathead Screwdriver.

添加评论

  • Remove the LCD screen from the LCD board.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Andrew Aw

于2010年04月08日注册

1 信誉积分

创作了2篇指南

团队

Cal Poly, Team 34-56, Forte Spring 2010 Cal Poly, Team 34-56, Forte Spring 2010 的会员

CPSU-FORTE-S10S34G56

4 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 2,037