修复你的物品 社区 商店

Motorola RIZR Z3 LCD Replacement

简介

Guide to replacing a broken LCD.

你所需要的

  1. Motorola RIZR Z3 LCD Replacement, Battery: 步骤 1 中的图像 1，2 Motorola RIZR Z3 LCD Replacement, Battery: 步骤 1 中的图像 2，2

    • Press the panel release button on the top of the phone and simultaneously pull the rear panel away from the phone.

    翻译

  2. Motorola RIZR Z3 LCD Replacement: 步骤 2 中的图像 1，2 Motorola RIZR Z3 LCD Replacement: 步骤 2 中的图像 2，2

    • Tilt the battery by lifting at the exposed notch.

    • Slide the battery out of its casing.

    翻译

  3. Motorola RIZR Z3 LCD Replacement, Motherboard: 步骤 3 中的图像 1，1

    • Use a T4 screwdriver to unscrew all six of the .216 inch screws that attach the housing to the case.

    翻译

  4. Motorola RIZR Z3 LCD Replacement: 步骤 4 中的图像 1，2 Motorola RIZR Z3 LCD Replacement: 步骤 4 中的图像 2，2

    • Use a plastic opening tool to lift the plastic casing.

    • Pull the plastic casing directly away from the phone.

    翻译

  5. Motorola RIZR Z3 LCD Replacement: 步骤 5 中的图像 1，1

    • Lift the black rubber loudspeaker housing up and out of the plastic casing.

    翻译

  7. Motorola RIZR Z3 LCD Replacement: 步骤 6 中的图像 1，2 Motorola RIZR Z3 LCD Replacement: 步骤 6 中的图像 2，2

    • Use a plastic opening tool to gently lift up the SIM card reader, located above the rubber antenna casing. You should hear a click as it releases.

    • Caution: Remove carefully, if broken, the phone will not be able to make calls.

    翻译

  8. Motorola RIZR Z3 LCD Replacement: 步骤 7 中的图像 1，2 Motorola RIZR Z3 LCD Replacement: 步骤 7 中的图像 2，2

    • Use a plastic opening tool to pry the two ribbon cable connectors, unclipping them from their sockets on the motherboard.

    • Caution: Remove carefully, if broken, the phone will not function properly.

    翻译

  9. Motorola RIZR Z3 LCD Replacement: 步骤 8 中的图像 1，2 Motorola RIZR Z3 LCD Replacement: 步骤 8 中的图像 2，2

    • Use a plastic opening tool to gently pry the motherboard up until you can tilt it with your fingers. Unhook it from the casing and slowly pull it out.

    • Caution: Do this gently Unclipping too fast may cause damage to your phone.

    翻译

  10. Motorola RIZR Z3 LCD Replacement, LCD: 步骤 9 中的图像 1，1

    • Turn the phone to the front.

    • Push the keypad out through the plastic casing.

    翻译

  11. Motorola RIZR Z3 LCD Replacement: 步骤 10 中的图像 1，1

    • Turn the phone to the side.

    • Thread the hinges of the slider through their holes in the casing and pull the slider down and away from the casing.

    翻译

  12. Motorola RIZR Z3 LCD Replacement: 步骤 11 中的图像 1，1

    • Use a T4 screwdriver to unscrew the two .15 inch screws holding the LCD to the faceplate.

    翻译

  13. Motorola RIZR Z3 LCD Replacement: 步骤 12 中的图像 1，3 Motorola RIZR Z3 LCD Replacement: 步骤 12 中的图像 2，3 Motorola RIZR Z3 LCD Replacement: 步骤 12 中的图像 3，3

    • Use a spudger to pry the plastic screen casing partially up from the LCD unit.

    • Use the spudger to pry the ribbon cable away from its clip on the LCD unit.

    • Caution: Do this carefully, damage to this ribbon cable will cause a blank screen.

    • Pull the plastic screen casing directly away from the LCD unit.

    翻译

  14. Motorola RIZR Z3 LCD Replacement: 步骤 13 中的图像 1，2 Motorola RIZR Z3 LCD Replacement: 步骤 13 中的图像 2，2

    • Use a spudger to lift the LCD partially away from the metal casing.

    • Use the spudger to pry the ribbon cable directly up from its clip on the metal casing.

    • Caution: Damage to the ribbon cable here will cause screen damage.

    • Pull the LCD completely away from the metal casing.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

Brooke Shuford

于10/10/11注册

65 声望

创作了3篇指南

徽章: 7

+ 4更多徽章

团队

Cal Poly, Team 5-34, Amido Fall 2011 Cal Poly, Team 5-34, Amido Fall 2011 的会员

CPSU-AMIDO-F11S5G34

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 1

总计 953