简介

This guide outlines the steps to take to remove or install the SIM card. The SIM card holds information that allows the service provider to locate and identify your phone. It is necessary for sending or receiving any calls or messages.

Turn the phone over.
  • Turn the phone over.

  • Press and hold the release button in the middle of the back panel to release the back cover.

  • Slide the bottom panel down to open.

添加评论

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
Remove the existing SIM card (if applicable) by applying little pressure with one finger and dragging it until the card is completely out. Remove the existing SIM card (if applicable) by applying little pressure with one finger and dragging it until the card is completely out.
  • Remove the existing SIM card (if applicable) by applying little pressure with one finger and dragging it until the card is completely out.

添加评论

Insert the new SIM card into the card reader with the chamfered edge in the upper left corner.
  • Insert the new SIM card into the card reader with the chamfered edge in the upper left corner.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Will Dickman

于2012年09月27日注册

28 信誉积分

创作了3篇指南

团队

Cal Poly, Team 6-31, Regan Fall 2012 Cal Poly, Team 6-31, Regan Fall 2012 的会员

CPSU-REGAN-F12S6G31

5 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,433