跳转到主内容

修复你的物品

维修的权力

商店

简介

This is a prerequisite guide! This guide is part of an another procedure and is not meant to be used alone.

Removes the midframe for the Moto X4.

  1. Remove the following twenty screws securing the midframe: Eleven silver 2.7 mm-long T3 screws
    • Remove the following twenty screws securing the midframe:

    • Eleven silver 2.7 mm-long T3 screws

    • Nine black 3.6 mm-long T4 screws

    • The midframe is still held in place by clips.

  2. The next few steps show how to loosen the midframe clips. Insert the flat end of a spudger under the right edge of the metal midframe and pry up to loosen the midframe. Insert an opening pick in the edge to hold the midframe in place.
    • The next few steps show how to loosen the midframe clips.

    • Insert the flat end of a spudger under the right edge of the metal midframe and pry up to loosen the midframe.

    • Insert an opening pick in the edge to hold the midframe in place.

  3. Insert the flat end of a spudger under the lower right edge of the midframe and pry up to release the midframe clip. Insert the flat end of a spudger under the lower right edge of the midframe and pry up to release the midframe clip.
    • Insert the flat end of a spudger under the lower right edge of the midframe and pry up to release the midframe clip.

  4. Grasp the lower edge of the midframe and pull the edge slightly to the right, to clear the metal midframe clip. Grasp the lower edge of the midframe and pull the edge slightly to the right, to clear the metal midframe clip. Grasp the lower edge of the midframe and pull the edge slightly to the right, to clear the metal midframe clip.
    • Grasp the lower edge of the midframe and pull the edge slightly to the right, to clear the metal midframe clip.

  5. Insert the point of an opening pick under the top left corner of the midframe and twist slightly to release the top clip. Insert the point of an opening pick under the top left corner of the midframe and twist slightly to release the top clip.
    • Insert the point of an opening pick under the top left corner of the midframe and twist slightly to release the top clip.

  6. Remove the midframe. To reinstall the midframe: Align the the midframe's top edge to the phone and press it into position.
    • Remove the midframe.

    • To reinstall the midframe:

    • Align the the midframe's top edge to the phone and press it into position.

    • Shift the bottom edge slightly to the left, to maneuver the left metal midframe clip underneath the phone edge.

    • Press the midframe's bottom edge into position.

结论

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

于2018年01月03日注册

143,463 信誉积分

创作了388篇指南

团队

iFixit iFixit 的会员

Community

135 名成员

创作了13,862篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 17