简介

If there is any problem with the phone that you plan to repair, removing the battery is the first step in completing the repairs and is critical for safety while working on the phone.

If your battery is swollen, take appropriate precautions.

  1. Insert the spudger into the notch on the corner of the phone and lift up to remove the back case.
    • Insert the spudger into the notch on the corner of the phone and lift up to remove the back case.

  2. Use the T4 Torx Screwdriver to remove the 17 3.2 mm screws in the back panel covering the battery.
    • Use the T4 Torx Screwdriver to remove the 17 3.2 mm screws in the back panel covering the battery.

    • Lift up and remove the back panel.

    • After removing the back panel, use the spudger to lift and detach the Battery Flux Cable from the Motherboard.

    • Wedge the spudger between the battery and the phone to lift the battery up and remove the battery. There will be slight resistance to this but the battery will not be damaged by this. It is just the adhesive tape.

结论

To reassemble your device, follow these instructions in reverse order.

8等其他人完成本指南。

Jack Haseman

于2018年03月19日注册

1,109 信誉积分

创作了6篇指南

团队

Baylor, Team S3-G2, Williams Spring 2018 Baylor, Team S3-G2, Williams Spring 2018 的会员

BU-WILLIAMS-S18S3G2

4 名成员

创作了6篇指南

my moto e4 plus screen is freezing , how can we unfreeze please advise

rajamfaisal - 回复

浏览统计数据:

过去的24小时: 13

过去的7天: 71

过去的30天: 368

总计 3,061