简介
This panel should be removed to get to all of the watch's insides. It is extremely fragile, so use caution when removing it.
你所需要的
-
-
Set the watch face down on a flat surface.
-
Place the heated iOpener on the face of the rear cover to loosen the adhesive underneath.
-
-
-
Follow the instructions here to remove the back cover without force by using some needles in the right places:
-
Then continue with step 5. Or don't use needles and just continue with the next steps.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
9等其他人完成本指南。