跳转到主内容

简介

This guide will go through the steps of replacing the camera module for the Motorola MB525 starting from the tear down of the phone to replacement of the camera module itself.

  1. Using the screwdriver and the T-5 bit, unscrew the seven 5 mm screws around the outside of the phone.
    • Using the screwdriver and the T-5 bit, unscrew the seven 5 mm screws around the outside of the phone.

  2. Remove the back cover of the phone by sliding the bottom black button to the unlock position and lifting it up. Remove the back cover of the phone by sliding the bottom black button to the unlock position and lifting it up.
    • Remove the back cover of the phone by sliding the bottom black button to the unlock position and lifting it up.

  3. Use a plastic opening tool to pry the battery out of the phone.
    • Use a plastic opening tool to pry the battery out of the phone.

  4. Unscrew the two silver screws located at the top of the back of the phone.
    • Unscrew the two silver screws located at the top of the back of the phone.

  5. Use a plastic opening tool to gently pry the midframe from the rest of the phone.
    • Use a plastic opening tool to gently pry the midframe from the rest of the phone.

  6. Start to pry around the bottom of the camera module with the metal spudger and replace with the new camera module. Be careful of the pins that are connected to the camera module on the bottom.
    • Start to pry around the bottom of the camera module with the metal spudger and replace with the new camera module.

    • Be careful of the pins that are connected to the camera module on the bottom.

结论

To reassemble your device, follow these instructions in reverse order.

Morgan Roark

于2014年10月08日注册

327 信誉积分

创作了3篇指南

团队

USF Tampa, Team 14-2, Leahy Fall 2014 USF Tampa, Team 14-2, Leahy Fall 2014 的会员

USFT-LEAHY-F14S14G2

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 295