配件

无需配件。

  1. Turn the phone so its back is facing you.
    • Turn the phone so its back is facing you.

    • Press the release button on the back cover, while simultaneously pulling the cover down.

    • Remove the back cover.

    添加评论

  2. Pinch the sides of the bottom of the battery and pull upward.
    • Pinch the sides of the bottom of the battery and pull upward.

    添加评论

    • Press and slide the SIM card down.

    • Remove the SIM card.

    添加评论

    • Orient the phone so its back is facing you.

    • Using a Torx T-4 screwdriver, carefully remove the 4 screws located at the corners of the phone.

    • Note: If you are using iFixit's screwdriver toolkit, look for the smallest T-screwbit.

    添加评论

    • Lodge a spudger in between the front panel and the main frame of the phone.

    • Using a good amount of torque, pry the front panel from the phone.

    添加评论

    • Turn the phone to its natural orientation.

    • Insert a spudger at the bottom of the phone, between the phone's frame and the circuit board.

    • Pry the circuit board from the frame.

    • Note: Prying away the board takes more force than you would expect.

    添加评论

    • Bend the screen clamps outward so they are no longer underneath the circuit board.

    • Pull the screen encasing away from the circuit board.

    • Caution: The screen-to-phone interface will still be connected.

    添加评论

    • Unplug the screen-to-phone interface.

    • Remove the screen from its encasing by pushing it out.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Christopher Wu

于2012年04月17日注册

19 信誉积分

创作了3篇指南

团队

Cal Poly, Team 12-40, Regan Spring 2012 Cal Poly, Team 12-40, Regan Spring 2012 的会员

CPSU-REGAN-S12S12G40

4 名成员

创作了8篇指南

motorola c168 network not working problem. how to repair network problem?

sattar - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 1,134