MiTM Pressure Washers CA2703HDHB1 2017 Recoil Starter Replacement

简介

This guide shows how to remove and replace the entire recoil starter assembly. The assembly is an OEM part for Honda GX200 engine models.

If you replace the recoil starter with a non-OEM part, you may have to remove the starter cap. For that, you will need the following additional tools:

3/4” deep socket

你所需要的

步骤 1 Remove the recoil starter bolts

MiTM Pressure Washers CA2703HDHB1 2017 Recoil Starter Replacement, Remove the recoil starter bolts: 步骤 1 中的图像 1，1

Before you begin, be sure that the engine is powered off and is cool to the touch.
Use a 10 mm socket to remove the three 24 mm long bolts.

编辑

步骤 2 Remove the recoil starter assembly

MiTM Pressure Washers CA2703HDHB1 2017 Recoil Starter Replacement, Remove the recoil starter assembly: 步骤 2 中的图像 1，1

Remove the recoil starter assembly.

编辑

步骤 3

If you are replacing the assembly with a non-OEM part, you may also have to replace the starter cap.
Remove the 3/4" bolt with a deep socket.
This bolt can be very difficult to remove. Use the hook as a bracing point to keep the starter cap from rotating.