跳转到主内容

简介

This guide will help you replace the battery in your MSI GS63VR 6RF Stealth Pro. You will need to have purchased the replacement battery prior if you are replacing your battery.

  1. Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.
    • Before you begin, be sure to turn off your laptop and discharge the battery down to 25%.

    • Use a Phillips screwdriver to remove the 15 screws securing the back cover.

    • Insert an opening tool or spudger in the seam and pry along the perimeter to loosen the back cover.

    • Do not insert the opening too too far into the back edge (with "Stealth" written on it), or you may damage the power LED.

    • The back cover is secured with clips. Too much pressure from the spudger can break the clips, but some flex is not dangerous.

    • Remove the back cover.

  2. Disconnect the battery by carefully pulling its connector towards the battery.
    • Disconnect the battery by carefully pulling its connector towards the battery.

    • Pull parallel to the battery, not straight up.

  3. The battery is attached to the laptop with a strong adhesive. Lift the battery from laptop.
    • The battery is attached to the laptop with a strong adhesive.

    • Lift the battery from laptop.

    • Be careful not to bend the or puncture the battery, as that may cause a fire hazard.

结论

To reassemble your device, follow these instructions in reverse order.

For optimal performance, after completing this guide, calibrate your newly installed battery.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

另外一个人完成了本指南。

Jay Etzkorn

于2017年09月20日注册

146 信誉积分

撰写一个指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 18

过去的30天: 73

总计 4,500