简介

After removing the top cover you will be able to replace the mouse buttons.

配件

无需配件。

  1. Hold the mouse in your hand so that the bottom side is facing upward.
    • Hold the mouse in your hand so that the bottom side is facing upward.

    • Locate the #1 screw towards the bottom half of the mouse.

    • Take the 4.76 mm Phillips screwdriver and unscrew the #1 screw that was previously located.

    باز کردن پیچ زیر موس

    h sh - 回复

  2. Place the mouse back on the hard surface, with the bottom side touching the hard surface.
    • Place the mouse back on the hard surface, with the bottom side touching the hard surface.

    • Gently, lift up the top cover of the mouse and remove.

    جدا کردن قاب رو و زیر موس

    h sh - 回复

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Locate the two tabs that are protruding from the button assembly.

    • Be careful not to break either of the two tabs by squeezing too hard.

    • Now pinch the tabs together to free the buttons.

    添加评论

    • Free the button assembly from the top cover by bringing the button section down.

    • Then sliding the button assembly out from the top cover through the opening.

    • When fully parted the top cover and the button assembly should look like this.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Maximilian Betkowski

于2013年01月11日注册

166 信誉积分

创作了4篇指南

团队

Cal Poly, Team 5-14, Forte Winter 2013 Cal Poly, Team 5-14, Forte Winter 2013 的会员

CPSU-FORTE-W13S5G14

5 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 3

过去的30天: 20

总计 1,491