Lenovo ThinkPad X100e Screen Replacement

步骤 1 Screen

Lenovo ThinkPad X100e Screen Replacement, Screen: 步骤 1 中的图像 1，2

Lenovo ThinkPad X100e Screen Replacement, Screen: 步骤 1 中的图像 2，2

在这个步骤中使用的工具：

Spudger

$2.99

购买

Use a Spudger tool to remove the screw covers on each side of the screen.
Be sure not to lose screw covers.

翻译

步骤 2

Lenovo ThinkPad X100e Screen Replacement: 步骤 2 中的图像 1，1

Using a magnetic screwdriver fit with a PH0 Bit, unscrew the two screws and carefully set the aside.

翻译

步骤 3

Lenovo ThinkPad X100e Screen Replacement: 步骤 3 中的图像 1，1

Pry open the bezel carefully with the spudger tool.
You will want to do this until the frame is completely off.

翻译

步骤 4

Lenovo ThinkPad X100e Screen Replacement: 步骤 4 中的图像 1，1

Remove all exposed screws and carefully set them aside. There should be 6 visible screws.
Be sure to set the screws aside on the magnetic mat.

翻译

步骤 5

Lenovo ThinkPad X100e Screen Replacement: 步骤 5 中的图像 1，1

Lift the screen up carefully, and remove the screws on both sides of the panel. There should be 4 screws.
The other two screws are located in the exact place on the other side.
Don't forget to place the screws on the magnetic mat, separate from other screws.

翻译

步骤 6

Lenovo ThinkPad X100e Screen Replacement: 步骤 6 中的图像 1，2

Lenovo ThinkPad X100e Screen Replacement: 步骤 6 中的图像 2，2

Remove the connector located at the very top of the screen beside the webcam.
To remove the connector, simply pull the connector out.

翻译

步骤 7

Lenovo ThinkPad X100e Screen Replacement: 步骤 7 中的图像 1，1

Fold the panel over until a strip of black tape is visible.
Peel the tape down until you get to the base.

翻译

步骤 8

Lenovo ThinkPad X100e Screen Replacement: 步骤 8 中的图像 1，2

Lenovo ThinkPad X100e Screen Replacement: 步骤 8 中的图像 2，2

Peel the piece of transparent tape back.
At this point there should be some exposed wires underneath the tape.

翻译

步骤 9

Lenovo ThinkPad X100e Screen Replacement: 步骤 9 中的图像 1，1

Remove the connector carefully with the spudger tool.

翻译

步骤 10

Lenovo ThinkPad X100e Screen Replacement: 步骤 10 中的图像 1，1

Remove the black tape fully.
Now your device is ready for a new panel.