跳转到主内容

简介

Follow this guide to remove the optical drive from the computer.

配件

没有特定配件。

  1. Turn off the computer.
    • Turn off the computer.

    • Disconnect the charging cable from the computer.

    • Failure to unplug the cable could result in electric shock.

    • Flip the computer upside down.

  2. Locate the two switches that lock the battery. Push the right-hand switch outward into the "unlocked" position. Locate the two switches that lock the battery. Push the right-hand switch outward into the "unlocked" position.
    • Locate the two switches that lock the battery. Push the right-hand switch outward into the "unlocked" position.

  3. Push and hold the left hand switch outward in the "unlocked" position, then gently slide the battery away from the computer.
    • Push and hold the left hand switch outward in the "unlocked" position, then gently slide the battery away from the computer.

  4. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  5. Remove the seven 5.3 mm Phillips  #1 screws holding the back panel in place.
    • Remove the seven 5.3 mm Phillips #1 screws holding the back panel in place.

  6. Pull the back panel off using the highlighted tab. The tab should give you enough leverage to pull the panel off smoothly. If the back panel is difficult to remove and feels like it is going to break, DO NOT force it. Check to confirm that all the screws are removed before attempting again.
    • Pull the back panel off using the highlighted tab. The tab should give you enough leverage to pull the panel off smoothly.

    • If the back panel is difficult to remove and feels like it is going to break, DO NOT force it. Check to confirm that all the screws are removed before attempting again.

  7. The computer should be open with many of the internal components shown. You can now access the hard drive, the RAM, and the keyboard.
    • The computer should be open with many of the internal components shown. You can now access the hard drive, the RAM, and the keyboard.

  8. Locate the Optical Drive 4.7 mm Philips #1 screw, which secures the Optical Drive into the body of the laptop. Locate the Optical Drive 4.7 mm Philips #1 screw, which secures the Optical Drive into the body of the laptop.
    • Locate the Optical Drive 4.7 mm Philips #1 screw, which secures the Optical Drive into the body of the laptop.

  9. Using the Philips #1 Screwdriver, remove the Optical Drive 4.7 mm Philips #1 screw.  Once you remove the screw, locate the metal tab beneath the screw and push it outwards.
    • Using the Philips #1 Screwdriver, remove the Optical Drive 4.7 mm Philips #1 screw. Once you remove the screw, locate the metal tab beneath the screw and push it outwards.

    • It may be useful to use the spudger to push the metal tab, as there is not enough space for your finger or plastic opening tool.

    • Be firm, yet gentle to avoid damaging the electronic connections.

  10. Slide the Optical Drive smoothly out of its slot. Slide the Optical Drive smoothly out of its slot.
    • Slide the Optical Drive smoothly out of its slot.

结论

To reassemble your device, follow these instructions in reverse order.

7等其他人完成本指南。

Dennis Wong

于2013年01月11日注册

483 信誉积分

创作了5篇指南

团队

Cal Poly, Team 18-40, Regan Winter 2013 Cal Poly, Team 18-40, Regan Winter 2013 的会员

CPSU-REGAN-W13S18G40

5 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 3

过去的30天: 22

总计 4,183