简介

These steps show how to remove the phone's front case. This allows access to many of the components located on the outer face of the phone.

Remove the four grey plugs using either tweezers or a push pin.
  • Remove the four grey plugs using either tweezers or a push pin.

添加评论

Remove the four screws that are now exposed using a Phillips #00 screwdriver.
  • Remove the four screws that are now exposed using a Phillips #00 screwdriver.

  • Be sure to put the screws in a safe place as they are very small and easy to lose.

添加评论

  • Once all the screws have been removed, use a plastic opener tool to pry the case from the rest of the phone.

  • Insert the opener tool into the seem between the case and the phone. Apply pressure to separate the two pieces.

  • Do this across the entire length of the seem until the case is no longer attached to the phone.

添加评论

  • The case can now be removed and the interior of the front is accessible.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Ryan Bishop

于2012年04月17日注册

1 信誉积分

创作了3篇指南

团队

Cal Poly, Team 12-39, Regan Spring 2012 Cal Poly, Team 12-39, Regan Spring 2012 的会员

CPSU-REGAN-S12S12G39

3 名成员

创作了16篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 677