修复你的物品 社区 商店

Kodak Signet 35 Shutter Spring Replacement

简介

If the shutter on your Kodak Signet 35 isn't working properly, then the shutter spring may need to be cleaned or replaced. This guide will show you how. Please make sure you have all the necessary tools, as well as a clean and stable surface on which to work, before you start these steps.

你所需要的

  1. Kodak Signet 35 Shutter Spring Replacement, Shutter Spring: 步骤 1 中的图像 1，3 Kodak Signet 35 Shutter Spring Replacement, Shutter Spring: 步骤 1 中的图像 2，3 Kodak Signet 35 Shutter Spring Replacement, Shutter Spring: 步骤 1 中的图像 3，3

    • While the camera is lying on its back, unscrew the front lens assembly and remove the lens and the faceplate. Then lift off the speed setting.

    编辑

  2. Kodak Signet 35 Shutter Spring Replacement: 步骤 2 中的图像 1，2 Kodak Signet 35 Shutter Spring Replacement: 步骤 2 中的图像 2，2

    • Remove the lever from the stopper by pushing it back and then upwards.

    编辑

  4. Kodak Signet 35 Shutter Spring Replacement: 步骤 3 中的图像 1，2 Kodak Signet 35 Shutter Spring Replacement: 步骤 3 中的图像 2，2

    • Remove the stopper by lifting it upwards with the tweezers.

    编辑

  5. Kodak Signet 35 Shutter Spring Replacement: 步骤 4 中的图像 1，3 Kodak Signet 35 Shutter Spring Replacement: 步骤 4 中的图像 2，3 Kodak Signet 35 Shutter Spring Replacement: 步骤 4 中的图像 3，3

    • Using tweezers, unhitch the spring from the base and remove it by lifting upwards.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Mellyssa Greene

于09/07/16注册

134 声望

撰写一个指南

徽章: 6

+ 3更多徽章

团队

USF Tampa, Team 6-3, Remmell Fall 2016 USF Tampa, Team 6-3, Remmell Fall 2016 的会员

USFT-REMMELL-F16S6G3

4 名成员

创作了9篇指南

2条评论

What kind of spring can be used to replace it or how would one revitalize the old spring?

Ben Le - 回复

What does “front lens assembly” look like? what parts do I have to unscrew?

Shawn Reynolds - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 8

过去 30 天： 24

总计 2,196