跳转到主内容
加入维修社区 - 创建账户

Kobo Mini Disassembly

你所需要的

    1. Kobo Mini Disassembly, Kobo Mini Disassembly: 步骤 1 中的图像 1,2 Kobo Mini Disassembly, Kobo Mini Disassembly: 步骤 1 中的图像 2,2
      • Pull on the corner to remove the cover.

      询问修复机器人

      添加评论

    2. Kobo Mini Disassembly: 步骤 2 中的图像 1,1
      • Remove the six screws.

      • Remove the back of the device.

      询问修复机器人

      添加评论

    3. Kobo Mini Disassembly: 步骤 3 中的图像 1,1
      • Remove the four screws from the mother board.

      • Remove the screen connector and the battery connector.

      • Remove the micro SD card.

      • Remove the motherboard from the chassis.

      询问修复机器人

      添加评论

    4. Kobo Mini Disassembly: 步骤 4 中的图像 1,2 Kobo Mini Disassembly: 步骤 4 中的图像 2,2
      • Remove the four screws from the screen frame.

      • Remove the screen

      询问修复机器人

      添加评论

    5. Kobo Mini Disassembly: 步骤 5 中的图像 1,1
      • And we finally finished.

      询问修复机器人

      添加评论

终点

取消:我没有完成这个指南。

3等其他人完成本指南。

9指南评论

Just a quick note, I noticed that the SD card in the teardown is a 4gb one. The Kobo Mini has only 2gb of storage. There's just under 2gb of unpartitioned space. You can use a partition manager to extend out the last partition to fill the card, and get close to 4gb of space.

There's a guide over on Mobile Read: https://www.mobileread.com/forums/showth...

Stephanie Raccoon - 回复 分享

Yes I think

Gabriel Bédard - 回复 分享

Thanks for the teardown! See https://www.mobileread.com/forums/showth... and https://wiki.mobileread.com/wiki/Kobo_Mi... for more disassembly advice and information about the components used.

I would be concerned about the reliability of the 4GB micro SD cards when extended to use the full unpartitioned space. While I could imagine a situation where 4GB cards were used due to unavailability of 2GB cards, there doesn’t seem to be a good reason to only format them to 2GB unless they were only guaranteed to reliably hold 2GB of data. In other words, I wonder if they were originally 4GB cards that failed some QA test and were only rated for use as 2GB capacity cards.

David Boddie - 回复 分享

How do you remove the battery connector? Simply pull? Remove the black little things on the sides in some way?

jasonhayden - 回复 分享

Yes you just need to pull it from the motherboard

Gabriel Bédard - 回复 分享

添加评论

浏览统计数据:

过去 24 小时: 3

过去 7 天: 27

过去 30 天: 133

总计 7,716