跳转到主内容

Fix Your Stuff

Right to Repair

Parts & Tools

  1. Remove the brown plug.
    • Remove the brown plug.

    • The screw attaching the microwave is below

  2. Remove the cross point screws from the outer case back One screw has a tamper proof head so cut a slot it in and unscrew with a flat head screw driver.
    • Remove the cross point screws from the outer case back

    • One screw has a tamper proof head so cut a slot it in and unscrew with a flat head screw driver.

  3. The socket is on top right side of the microwave
    • The socket is on top right side of the microwave

    • Remove the plugs

    • Bend up the metal clips, and pull out the socket

  4. Remove the white glue (or sealer) that's around the bulb screw using a small screw driver. The glue goes all the way down the thread so remove as much as you can see.
    • Remove the white glue (or sealer) that's around the bulb screw using a small screw driver.

    • The glue goes all the way down the thread so remove as much as you can see.

    • Use leather gloves to unscrew incase the bulb breaks. It need quite a lot of force so make really sure you've got every bit a glue out.

  5. When you re assemble the outer case make sure the tabs on the front go either side of the front.
    • When you re assemble the outer case make sure the tabs on the front go either side of the front.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Martin Hampton

于2016年02月13日注册

658 信誉积分

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 8

过去的30天: 25

总计 555