跳转到主内容

简介

Use this guide to replace the Wi-Fi Card of the IBM Thinkpad R40.

配件

没有特定配件。

  1. Use a screwdriver to remove the screws located at the bottom of the laptop, covering the battery pack.
    • Use a screwdriver to remove the screws located at the bottom of the laptop, covering the battery pack.

  2. Remove the battery from the laptop and place it to the side.
    • Remove the battery from the laptop and place it to the side.

  3. Loosen the screw covering the Wi-Fi card panel.
    • Loosen the screw covering the Wi-Fi card panel.

  4. Open the now loosened section. Release the clips that hold the Wi-Fi card in place.
    • Open the now loosened section.

    • Release the clips that hold the Wi-Fi card in place.

    • Remove the Wi-Fi card.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Erin

于2011年09月08日注册

231 信誉积分

创作了2篇指南

团队

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 18

总计 3,521