跳转到主内容

Huawei P8 Lite Vibrator Replacement

你所需要的

  1. Huawei P8 Lite Vibrator Replacement, Back Cover: 步骤 1 中的图像 1,2 Huawei P8 Lite Vibrator Replacement, Back Cover: 步骤 1 中的图像 2,2
    • Use an Opening Tool and start to lever up the back cover of your Huawei P8 Lite at the bottom of your phone.

  2. Huawei P8 Lite Vibrator Replacement: 步骤 2 中的图像 1,3 Huawei P8 Lite Vibrator Replacement: 步骤 2 中的图像 2,3 Huawei P8 Lite Vibrator Replacement: 步骤 2 中的图像 3,3
    • There are clips around the whole mid frame, holding down the back cover. Open all of them with the Opening Tool.

    • When all clips are open, remove the back cover from the rest of the phone.

    • If the back cover doesn't come freely, there are probably some additional clips that need to be disconnected.

  3. Huawei P8 Lite Vibrator Replacement, Loudspeaker: 步骤 3 中的图像 1,1
    • Use a tweezer to remove the warranty sticker which sits on a screw in the bottom right of your phone.

  4. Huawei P8 Lite Vibrator Replacement: 步骤 4 中的图像 1,1
    • Remove the 4 black Torx T5 screws which hold down the lower part of the loudspeaker.

    • Remove the three silver Phillips #00 screws which hold down the upper part of the loudspeaker.

  5. Huawei P8 Lite Vibrator Replacement: 步骤 5 中的图像 1,1
    • Remove the loudspeaker carefully.

  6. Huawei P8 Lite Vibrator Replacement, Motherboard: 步骤 6 中的图像 1,3 Huawei P8 Lite Vibrator Replacement, Motherboard: 步骤 6 中的图像 2,3 Huawei P8 Lite Vibrator Replacement, Motherboard: 步骤 6 中的图像 3,3
    • Remove the three Phillips #00 screws that hold the metal plate in place.

    • Remove the metal plate with a tweezer.

    • Unplug the battery flex connector with a spudger.

  7. Huawei P8 Lite Vibrator Replacement: 步骤 7 中的图像 1,1
    • Remove the two Torx T5 screws.

    • If there is a tamper evident sticker over your screws remove them to properly seat your driver.

    • Remove the five Phillips #00 screws.

  8. Huawei P8 Lite Vibrator Replacement: 步骤 8 中的图像 1,2 Huawei P8 Lite Vibrator Replacement: 步骤 8 中的图像 2,2
    • Carefully pry off the plastic cover on the left side. The NFC antenna contacts might be slightly glued to the cover.

    • Then remove the top cover.

  9. Huawei P8 Lite Vibrator Replacement: 步骤 9 中的图像 1,3 Huawei P8 Lite Vibrator Replacement: 步骤 9 中的图像 2,3 Huawei P8 Lite Vibrator Replacement: 步骤 9 中的图像 3,3
    • Remove the SIM card and SD card trays.

    • Disconnect the three plug connectors and one ZIF connector.

    • Unlock the ZIF connector by lifting the small black plastic lever.

  10. Huawei P8 Lite Vibrator Replacement: 步骤 10 中的图像 1,3 Huawei P8 Lite Vibrator Replacement: 步骤 10 中的图像 2,3 Huawei P8 Lite Vibrator Replacement: 步骤 10 中的图像 3,3
    • Remove the volume and power button cable.

    • Take out the motherboard by lifting the bottom part first.

    • Pay attention to the cables, so they don't rip when staying stuck to the motherboard.

    • On the back of the motherboard there is a thermal pad (pink rubber-like gob) for heat dissipation. If this thermal pad broke or is too dried out you might want to replace it with a new one.

  11. Huawei P8 Lite Vibrator Replacement, Vibrator: 步骤 11 中的图像 1,2 Huawei P8 Lite Vibrator Replacement, Vibrator: 步骤 11 中的图像 2,2
    • Pry off the vibrator using a plastic opening tool.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Tobias Isakeit

于03/31/14注册

117,598 声望

创作了188篇指南

团队

Master Techs Master Techs 的会员

Community

322 名成员

创作了2,535篇指南

一条评论

Doğrusu Güzel Anlatılmış Ve Ben Her Zaman Elektronık Tüm Parçalarda KEndi İşimi Kendım Yaparım Araba Bır Ütü Belkı Bir Mekanık Parça Bu Seferde Titreşim Motorumu Deyiştirmek İstedim Ve Bu Resimler Sayesınde Kötü tornavaıdalarla Bile yarım saatte İşlem Tamam Teşekkur Edıyorum Emegi Geçipte Burada Bunu Paylaşan Herkesten

orcun adana - 回复

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 2

总计 1,519