修复你的物品 社区 商店

How to join two wires with solder

简介

Before reading this guide, ensure you know how to strip wires and solder a connection. If not, please look at the following guides.

Stripping Wire: Wire Stripping

Soldering:如何焊接和拆焊

你所需要的

  1. How to join two wires with solder, How to join two wires with solder: 步骤 1 中的图像 1，1

    • Put one of the paired wires on one of the helping hand's clamp. Put the other pair of wires on the remaining clamp.

    • Make sure the wires' stripped ends are facing each other or are towards the center of the workplace. If not, orientate the wires accordingly.

    编辑

  2. How to join two wires with solder: 步骤 2 中的图像 1，2 How to join two wires with solder: 步骤 2 中的图像 2，2

    • Using both stripped wire ends, wrap and tie both of the ends together.

    编辑

  4. How to join two wires with solder: 步骤 3 中的图像 1，1

    • Solder the tied ends of the filament.

    • Ensure to solder the connection completely, not just one area.

    • Try not to put too much solder on the connection, as it will add more resistance.

    编辑

  5. How to join two wires with solder: 步骤 4 中的图像 1，1

    • Pull on the two wires firmly to ensure the solder does not separate.

    编辑

  6. How to join two wires with solder: 步骤 5 中的图像 1，2 How to join two wires with solder: 步骤 5 中的图像 2，2

    • To properly protect the soldered wire connection, use heat shrink.

    • Cut enough heat shrink to cover the soldered connection.

    • Slip the heat shrink onto the connection.

    • Using a heat generator, such as a heat gun or a hairdryer, heat the heat shrink around all of the angles until it securely covers the soldered connection.

    编辑
结论

This technique will allow wires to be extended both electrically and structurally without the need of longer wires.

8等其他人完成本指南。

作者

与6其他贡献者

Joeny Zhen

于02/24/15注册

427 声望

撰写一个指南

徽章: 6

+ 3更多徽章

团队

Cal Poly, Team 23-1, Green Winter 2015 Cal Poly, Team 23-1, Green Winter 2015 的会员

CPSU-GREEN-W15S23G1

4 名成员

创作了4篇指南

一条评论

Perhaps I might recommend sliding the H.S. tubing on before soldering the joint in case the wires are connected on the other end to something else.

Nathaniel Loeblein - 回复

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 10

过去 30 天： 34

总计 3,634