简介

Wire needs to be exposed from its insulation in order before it can be soldered to another wire. Wire stripping exposes the wire so you are able to make good connections.

配件

无需配件。

  1. Match your gauge of wire to the gauge on a wire stripper.
    • Match your gauge of wire to the gauge on a wire stripper.

  2. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  3. Place the wire stripper about a 1/4” from the end of the wire and squeeze down.
    • Place the wire stripper about a 1/4” from the end of the wire and squeeze down.

  4. While squeezing, pull the stripper along the end of the wire. This should expose some of the wire by removing its insulation.
    • While squeezing, pull the stripper along the end of the wire. This should expose some of the wire by removing its insulation.

结论

After your wire has been stripped, the exposed wire is ready to be soldered and reconnected to other parts of the microphone.

另外一个人完成了本指南。

nat coll

于2012年09月27日注册

384 信誉积分

创作了14篇指南

团队

Cal Poly, Team 7-53, Forte Fall 2012 Cal Poly, Team 7-53, Forte Fall 2012 的会员

CPSU-FORTE-F12S7G53

5 名成员

创作了18篇指南

浏览统计数据:

过去的24小时: 3

过去的7天: 8

过去的30天: 33

总计 2,426