跳转到主内容

修复你的物品

维修的权力

商店

简介

Follow this guide to install a 2.5” SSD into a silicone enclosure sold by iFixit.

  1. Before you insert the new hard drive, note the orientation of the SATA connectors embedded in the enclosure: The wide power SATA port
    • Before you insert the new hard drive, note the orientation of the SATA connectors embedded in the enclosure:

    • The wide power SATA port

    • The narrower data SATA port

  2. Using the previous step, orient the new drive so that its SATA connectors will align with the enclosure's. Slide the drive into the enclosure's opening. Push the drive into the enclosure until it stops sliding and the SATA connectors are completely seated.
    • Using the previous step, orient the new drive so that its SATA connectors will align with the enclosure's.

    • Slide the drive into the enclosure's opening.

    • Push the drive into the enclosure until it stops sliding and the SATA connectors are completely seated.

  3. Stretch the remaining enclosure corners over the drive so that the silicone cover encapsulates the drive. Stretch the remaining enclosure corners over the drive so that the silicone cover encapsulates the drive. Stretch the remaining enclosure corners over the drive so that the silicone cover encapsulates the drive.
    • Stretch the remaining enclosure corners over the drive so that the silicone cover encapsulates the drive.

结论

Your drive is ready to be used!

另外一个人完成了本指南。

Arthur Shi

于2018年01月03日注册

148,558 信誉积分

创作了393篇指南

团队

iFixit iFixit 的会员

Community

135 名成员

创作了14,475篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 6

过去的30天: 21

总计 326