修复你的物品 社区 商店

How to Change the Oil for the Honda EU2200IT A2

简介

This guide shows how to change the engine oil for the Honda EU2200IT generator. This procedure is a prerequisite for many other repairs.

Oil specifications:
SAE 10W-30
0.46 US quarts (0.44 L)

你所需要的

  1. How to Change the Oil for the Honda EU2200IT A2, Honda EU2200IT A2 Safety Precautions: 步骤 1 中的图像 1，1

    • Before you begin, make sure the generator is switched off and the generator is cool to the touch.

    编辑

  2. How to Change the Oil for the Honda EU2200IT A2, Disconnect the spark plug: 步骤 2 中的图像 1，2 How to Change the Oil for the Honda EU2200IT A2, Disconnect the spark plug: 步骤 2 中的图像 2，2

    • Lift and remove the spark plug cover.

    编辑

  3. How to Change the Oil for the Honda EU2200IT A2: 步骤 3 中的图像 1，2 How to Change the Oil for the Honda EU2200IT A2: 步骤 3 中的图像 2，2

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

    编辑

  5. How to Change the Oil for the Honda EU2200IT A2, Remove the maintenance cover: 步骤 4 中的图像 1，1

    • Use a Phillips #2 screwdriver to loosen the screw holding the maintenance cover in place.

    编辑

  6. How to Change the Oil for the Honda EU2200IT A2: 步骤 5 中的图像 1，3 How to Change the Oil for the Honda EU2200IT A2: 步骤 5 中的图像 2，3 How to Change the Oil for the Honda EU2200IT A2: 步骤 5 中的图像 3，3

    • Swing the top of the maintenance cover out.

    • Remove the maintenance cover.

    编辑

  7. How to Change the Oil for the Honda EU2200IT A2, Drain the engine oil: 步骤 6 中的图像 1，2 How to Change the Oil for the Honda EU2200IT A2, Drain the engine oil: 步骤 6 中的图像 2，2

    • Unscrew and remove the oil filler cap.

    编辑

  8. How to Change the Oil for the Honda EU2200IT A2: 步骤 7 中的图像 1，2 How to Change the Oil for the Honda EU2200IT A2: 步骤 7 中的图像 2，2

    • Place an oil pan below the fill port to catch the engine oil.

    • Carefully tilt the generator towards the oil pan to drain the oil.

    编辑

  9. How to Change the Oil for the Honda EU2200IT A2: 步骤 8 中的图像 1，1

    • During reassembly, be sure to refill the engine oil:

    • If you recently resealed the crankcase cover with liquid sealant, wait at least 20 minutes before adding oil.

    • Use SAE 10W-30 oil, up to 0.46 US quarts.

    • Add oil until the dipstick is almost completely submerged.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

Arthur Shi

于01/03/18注册

252,818 声望

创作了526篇指南

徽章: 47

+ 44更多徽章

团队

iFixit iFixit 的会员

Staff

135 名成员

创作了16,817篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 15

过去 30 天： 54

总计 3,498