简介
Use this guide to replace the adhesive underneath the power button board and the interconnect cable in your Kobo Libra Colour eReader.
你所需要的
-
-
在这个步骤中使用的工具:Tesa 61395 Tape$2.99
-
Peel the power button board adhesive strip off its yellow liner to expose the adhesive underneath.
-
-
在这个步骤中使用的工具:Tesa 61395 Tape$2.99
-
Repeat the same adhesive application procedure for the interconnect cable adhesive strip.
-
-
-
Reconnect the interconnect cable to the power button board.
-
Place the power button board on its spot on the frame, making sure it sits properly on its alignment pegs.
-
Use the flat end of a spudger, or your finger, to press down the power button board and adhere it.
-
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers Community for help.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers Community for help.