简介
Honda Civic 2016 uses Keyless Remote to start the engine in addition to a normal lock/ unlock mechanism. Without battery, the car cannot be started. This guide show how to replace the Lithium battery inside Honda Civic 2016 Keyless Remote.
你所需要的
-
-
Make sure to have replacement battery ready. You will need 1 pc of CR 2032 Lithium battery.
-
Remove the metal key by sliding the switch on the back of the remote and pulling the key out.
-
-
-
After removing the key, you will see 2 plastic bars. This is a place where you can split the remote open.
-
The manufacturer recommeded using a coin but any hard tool or even the key itself will work as well.
-
The manufacturer recommended using a cloth covering your coin/ tool to prevent it from denting the plastic bars.
-
-
-
-
Now you can gently pry it open
-
Removing the old battery from the left side.
-
Remember that the + side of the battery is facing up.
-
-
-
Inserting a new CR 2032 battery from the right side first and then press the battery down. It should make a good 'click' sound
-
Again, make sure the + side of the battery is facing upward.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
12等其他人完成本指南。
团队
