跳转到主内容

Hamilton Beach 51101BA Power Button Replacement

你所需要的

  1. Hamilton Beach 51101BA Power Button Replacement, Power Button: 步骤 1 中的图像 1,3 Hamilton Beach 51101BA Power Button Replacement, Power Button: 步骤 1 中的图像 2,3 Hamilton Beach 51101BA Power Button Replacement, Power Button: 步骤 1 中的图像 3,3
    • Remove the container from the base.

    • Hold the blender and the container, then twist the container in a clockwise motion.

    • Make sure to follow the lock and unlock markings on the container.

  2. Hamilton Beach 51101BA Power Button Replacement: 步骤 2 中的图像 1,1
    • Turn the blender so the bottom is facing you.

    • Using a Phillips #2 screwdriver, remove the two 5 mm Phillips screws from the base.

  3. Hamilton Beach 51101BA Power Button Replacement: 步骤 3 中的图像 1,1
    • Using a Phillips #2 screwdriver, remove the two 5 mm Phillips screws from the motor platform.

  4. Hamilton Beach 51101BA Power Button Replacement: 步骤 4 中的图像 1,2 Hamilton Beach 51101BA Power Button Replacement: 步骤 4 中的图像 2,2
    • Unhinge the motor platform from the blender.

    • You may need a plastic spudger to unhinge the plastic bottom piece from the base of the blender.

    • You do not need to completely remove this piece from the base.

  5. Hamilton Beach 51101BA Power Button Replacement: 步骤 5 中的图像 1,1
    • Pull out the rectangular green piece.

    • This is the actual power button.

  6. Hamilton Beach 51101BA Power Button Replacement: 步骤 6 中的图像 1,1
    • Some experience in soldering is required!

    • On the back of the power button, desolder the red and grey wires that are connected to the piece.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Brandon Nunez

于08/28/15注册

283 声望

创作了2篇指南

团队

USF Tampa, Team 2-5, Sullivan Fall 2015 USF Tampa, Team 2-5, Sullivan Fall 2015 的会员

USFT-SULLIVAN-F15S2G5

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 2

过去 7 天: 6

过去 30 天: 19

总计 3,237