简介

This guide will walk you through the steps necessary to access the power button on your HTC Evo 4G for replacement. The four steps require no special skills. There are small parts that could get lost easily upon removal if not handled carefully.

  1. Using the tip of your finger, lift the battery from the end closest to the camera. Remove the battery from the rear inner frame.
    • Using the tip of your finger, lift the battery from the end closest to the camera.

    • Remove the battery from the rear inner frame.

  2. Remove the six screws on the back of your phone with the T5 screwdriver. Be careful not to lose the screws.
    • Remove the six screws on the back of your phone with the T5 screwdriver. Be careful not to lose the screws.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Use the plastic opening tool to gently pry the inner frame apart from the rest of the phone. Lift off the inner frame from the rest of the phone to remove it. Lift off the inner frame from the rest of the phone to remove it.
    • Use the plastic opening tool to gently pry the inner frame apart from the rest of the phone.

    • Lift off the inner frame from the rest of the phone to remove it.

  5. Carefully remove the power button located at the top of the phone Carefully remove the power button located at the top of the phone
    • Carefully remove the power button located at the top of the phone

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Sage Jurado

于2014年03月13日注册

864 信誉积分

创作了4篇指南

团队

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 4

总计 433