HP Windows Mixed Reality Controllers TPC-Q044 Shell Replacement - iFixit 维修指南

加入维修社区 - 创建账户

简介

Follow this guide to open the housing on your HP Windows Mixed Reality Controllers TPC-Q044.

This guide goes over steps for the left controller, but the process is identical for the right controller.

Because most of the components in this device are enclosed within the housing, replacement for nearly all parts will require you to follow these instructions to access the internals.

你所需要的

1. 步骤 1 Batteries
  Slide the rear compartment cover in the direction of the arrow.
  
  If replacing batteries, ensure the (+) and (-) on the battery match the (+) and (-) labeled in the battery compartment.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
1. 步骤 2 Shell
  Remove the four 4mm screws using a Phillips #00 screwdriver.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
3. 步骤 3
  Grip the main body and pull the joystick outwards until the entire front panel pops off.
  
  Remove the 6mm screw in the corner of the joystick well using a Phillips #00 screwdriver.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024
4. 步骤 4
  Use a spudger to pry apart the two halves of the assembly.
  
  Work slowly, prying a small section at a time until the halves are completely separated.
  编辑
  
  询问修复机器人
  
  添加评论
  
  1024

结论

To reassemble your device, follow these instructions in reverse order.

取消：我没有完成这个指南。

另外一个人完成了本指南。

作者

与4其他贡献者

Clement Cheung

于01/24/19注册

643 声望

创作了5篇指南

+ 10更多徽章

团队

Cal Poly, Team S18-G5, White Winter 2019 Cal Poly, Team S18-G5, White Winter 2019 的会员

CPSU-WHITE-W19S18G5

2 名成员

创作了20篇指南

0指南评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 5

过去 30 天： 28

总计 1,209