HP Chromebook 11 G4 Keyboard Replacement - iFixit 维修指南

加入维修社区 - 创建账户

简介

This guide will walk you through the replacement process of a defective or broken keyboard on your HP Chromebook 11 G4. Removing the keyboard is also the basic step to accessing all of the other internal components.

你所需要的

1. 步骤 1 Keyboard
  Position the closed Chromebook with the rubber pads are facing up.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
2. 步骤 2
  Slide the flat end of the spudger under the rubber pads at the upper right-hand and the upper left-hand corners.
  
  Pry off the rubber pads to reveal a screw under each pad.
  
  The rubber pads are attached with a strong adhesive. The force applied may damage the pads.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
3. 步骤 3
  Remove the eleven 6mm Phillips #1 screws.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
5. 步骤 4
  Flip over the Chromebook and open it.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
6. 步骤 5
  Insert the flat end of the spudger between the bottom body of the Chromebook and keyboard body.
  
  Slide the spudger along the gap, applying downward pressure to separate the two components.
  
  You should hear popping sounds as you slide the spudger along the edge.
  
  If the spudger gets stuck while sliding, simply slide the spudger back for a bit, and continue sliding forward.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
7. 步骤 6
  Lift the bottom of the keyboard assembly to reveal the internal components of the device.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
8. 步骤 7
  Use the pointed end of the spudger to flip up the black tabs on the two ZIF connectors located on the motherboard.
  
  Disconnect the ribbon cables from the motherboard by gently sliding them out of their sockets.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024
9. 步骤 8
  Remove the keyboard assembly by lifting it off the laptop base.
  翻译
  
  询问修复机器人
  
  添加评论
  
  1024

结论

To reassemble your device, follow these instructions in reverse order.

取消：我没有完成这个指南。

3等其他人完成本指南。

作者

与5其他贡献者

Jair Herrera

于04/26/17注册

694 声望

创作了4篇指南

+ 9更多徽章

3指南评论

How do you remove the keyboard from the assembly though? And I wish there was a mention of the fact that the heat sink is attached to the keyboard assembly.

Kyle B - 2018年9月25日回复分享

Same question as the person above. I need to remove the keyboard from the assembly.

Stephen Mason - 2019年10月5日回复分享

If you look up the parts you'll see that the entire top panel and keyboard are one assembly.

Nacho Biniz - 2023年9月17日回复分享

浏览统计数据:

过去 24 小时： 1

过去 7 天： 10

过去 30 天： 62

总计 10,143